Digital Wood Moisture Meter Wood Humidity Bamboo Timber Building Materials Moisture Tester Temperature Moisture Tester MD8040
Specification:
Parameters: %material moisture contents . Temperature C/F
Range: 0.0%-95.7% , -10C - 50C
Accuracy: +/-2%. +/-1C
Resolustion: 0.1%. 0.1C . 0.1F
Digital Display: 3 digits
Auto off : 10 minutes without operation
Operating Temperature: -10-60 C (-4-140 F)
Measurement Selection:
Material 1 : 9.0-54.8% (Hard wood such as Beech ,Spruce , Larch.Birch , Cherry , Walnut)
Material 2 : 7.3-47.9% (Soft wood such as Oak , Pine , Maple, Ash-tree Douglas Fir, Meranti)
Material 3: 1.0-22.1% (Cement or Concrete plane , Plaster produce )
Material 4 : 0.0-11% (Anhydrite plane)
Material 5: 0.7-8.5% (Cemnent mortar)
Material 6 : 0.5-9.8% (Lime mortar)
Material 7 : 0.0-16.4% (Bricks)
General Information :
power supply: 1.5V*3 AAA Battery ( not included )
Size: 121x55x28mm
Weight: 105g
standard packaging: box, warranty card, manual
---------------------------------------------------------------------------------
Operation Tip:
1, in order to ensure that the measurement accuracy, use the multi-point measurements were repeated.
2, when measuring timber must be inserted into the timber probe needle.
3, all possible sources of interference (eg hand) as far as possible away from the needle probe (transducer).
4, the instrument must be self-test or replace the battery after a newly installed, ensure that the instrument is working properly.
5. Be careful during testing instrument probe needles do not hurt your skin, please immediately put the protective cover after the end of the test, the instrument shall be placed in the reach of children.
|
|
Digital Wood Moisture Meter Wood Humidity Bamboo Timber Building Materials Moisture Tester Temperature Moisture Tester Images
|
